Extreme Turbo Systems

ETS 2015+ Subaru WRX Front Mount Intercooler Kit

  • Black Friday Sale
  • Regular price $1,554.00


Ask a Question

Tired of heat soak? We don't blame you!  

It's time to upgrade to an intercooler that is designed specifically for the 2015+ WRX with performance in mind.   Unlike other manufacturers we design all of our cores per application, which results in the absolute best performing intercooler on the market.

All of our cores feature an offset and staggered  internal and external fin pack.   The external fin pack is dense for maximum heat transfer, where the internal fin pack is less dense for maximum flow and performance.   The key is finding the perfect balance between the two, which is what we do per application.    

It's common for customers to be drawn to cheaper alternatives.   Unfortunately those intercoolers are cheap for a reason!   Most cheap intercoolers utilize a straight through internal fin pack, which acts more like a tunnel than a splitter; This results is much higher/hotter intake air temps, which then leads to timing reduction, knock, miss-fires, detonation, etc.

The ETS 2015+ WRX Intercooler is designed  to perform!  

  • We start by locating the inlets and outlets in the middle of the core, which allows for proper air distribution and flow throughout the core.  
  • Each inlet and outlet is hand ported to reduce turbulence and promote maximum flow.   We've seen other manufacturers simply weld on a tube and not debur the inside, which creates excess turbulence and disrupts air flow through the core.  

The proof is in the results!

2015+ WRX World Record - Kozmic Motorsports


    • Massive 26"  wide intercooler core - Designed for maximum heat transfer and minimal pressure drop
    • Core Size: 26" Wide, 11.37" Tall and 3.0", 3.5", 4.0" or 5.0" Thick.
    • Precision TIG welded construction
    • Lightweight end tanks design
    • Hand ported inlet and outlet for optimal flow
    • ETS logo stenciled on intercooler.


    • Available in 3.0", 3.5", 4.0" and 5.0" core thickness.
    • Core Anodizing Options - Blue, Red, Black, Gold, and Purple.

Quality Assurance

    • Every intercooler is pressure tested to 50 psi
    • Every product is cleaned and inspected prior to shipment.    
    • Fins are protected/covered during shipment to prevent damage.
    • Inlet and outlet tubes are sealed to prevent any packing material from entering the intercooler as well as keep debris out during install.  


    • 2015+ Subaru WRX

Intercooler Piping Kits

Stainless Steel Intercooler Piping  - Wrinkle Black Powder Coat

    • Every ETS 2015+ WRX Intercooler Piping Kits is CNC mandrel bent out of 304 stainless steel for maximum performance, flow, durability and most of all, reliability.
    • ETS Spec 4-ply silicone couplers are designed for high heat/turbocharged applications.
    • High quality t-bolt clamps are provided to ensure a leak free seal.
    • Optional blow off valve flanges available  (Stock, TiAL, Turbosmart, Etc.)
    • High Quality Mounting Hardware

2015 WRX Intercooler Piping - Wrinkle Black
Titanium Intercooler Piping - Available In Brushed or Burn Finish

The ETS 2015+ Cold Side Titanium Piping Kit is the perfect upgrade for those wanting to  maximize performance and shed weight.    We have a beautiful burned finish available as pictured below as well as a brushed finish for those that want to remain  inconspicuous.

Available Titanium Finishes

    • Brushed (no color/raw finish)
    • Burned (as pictured below)

2015+ WRX Titanium Intercooler Piping

    Optional Accessories (Sold Separately)

    Engine/Pulley Cover w/ ETS Logo and Anodized Fasteners

    After replacing the factory top mount intercooler with an aftermarket front mount intercooler you're left with  a shroud that has no real purpose.   Don't worry though,   we have you covered, literally!   The ETS Pulley/Engine cover is the perfect  upgrade to finish your engine bay.

    2015+ WRX Engine Cover

    Intake w/ Optional Airbox

    Looking to add some performance to your vehicle without sacrificing reliability?   The 2015+ ETS WRX Intake is your answer! All of our intake kits are designed for maximum flow and performance.

    The truth is in the filter!   We worked closely with K&N to develop a filter that meets our expectations and performance goals.   Unlike other filters on the market, the ETS filter is constructed with deep pleats for maximum surface area, rounded internal edges to prevent turbulence, and the largest flow area of any filter on the market for the 15+ WRX.

    Couple our custom spec'd ETS Filter with one of our in house designed billet velocity stacks and you have a combination for success!    

    2015+ WRX Intake


      Customer Reviews

      Based on 13 reviews
      Ernest M
      Did it for the gram

      Awesome intercooler. Excellent fit/finish on couplings and intercooler. Powder coating on
      piping leaves a little bit to be desired (easily scratched)

      Thank you for your feedback! We can re-powdercoat any of your wrinkle black piping free of charge, as we do all of that coating in-house, you'd just be responsible for the shipping charges.

      Additionally, you may be able to clean up some of the scratches as long as they aren't super deep in the material with some brake cleaner and a clean rag.

      -Team ETS

      dylan nemeth
      Ets front mount review

      Amazing product, install was very easy, all parts lined up perfectly, perfect customer service as well. Will recommend for sure

      Great Product - Good Fitment

      Product quality is really good. Everything fit and installed easily. No issues, would highly recommend this kit if you're planning to go FMIC, or if you're unhappy with your current FMIC setup and looking to replace it with something of higher quality.

      Devin Castro
      Ets fmic

      Thank u guys for quality products I am super satisfied keep up the good work 💯👍🏽


      Awesome product

      Rio Duran
      She is THICK!

      I went with a 4 inch core to replace the stock TMIC and wow this baby is thick! This kit was very high quality and fit with no issues! This intercooler keeps the charged air temps much lower than the stock TMIC and looks great in the front!



      Have a Question?

      Be the first to ask a question about this.

      Ask a Question

      Net Orders Checkout

      Item Price Qty Total
      Subtotal $0.00

      Shipping Address

      Shipping Methods