The ETS Mitsubishi Evolution X Intake is proven to be the highest flowing intake on the market. We start this intake kit off with a massive high flow ETS Spec K&N Filter, followed by a smooth transition to the factory MAF housing with our billet velocity stack, and completed with a cnc mandrel bent intake pipe to the turbocharger.
This intake has been dyno proven to gain over 56whp when used with a boost controller at 22psi on the factory turbocharger, and even more with an aftermarket turbocharger!
Turbocharger induction sound is increased with our massive high flow ETS Spec K&N filter and billet velocity stack.
The ETS Mitsubishi Evo X Intake was designed to be an easy install without the need to cut and modify your car. This piece installs and fits as if it had a Mitsubishi part number and installation can be completed with a few simple hand tools.
Features:
- High Flow ETS Spec K&N Filter.
- ETS Billet CNC MAF Adapter
- Perfect Transition From Adapter To MAF
- Includes BOV Recircluation Hoses.
- Includes heat shield to prevent idle surge.
- All necessary couplers, clamps and hardware for an easy install.
- 56whp increase when used with a boost controller @ 22psi.
QUESTIONS & ANSWERS
Ask a Question-
Does the stock maf housing option come with a maf housing or is the price difference due to the stock maf housing option using the one I already have?
Stock MAF housing option assumes you have a stock MAF housing and will be reusing it.
The larger 3.5" MAF option comes with our larger MAF housing. -
Will this fit exactly the same and will the same properties apply as the non titanium ETS intake?
Yep. It is just a material change. The fitment and performance of the two is the same. This is only half the weight of the SS option though.
-
Is it possible to have the tatinium not burn ?
Yes, that is the not burned option in the drop down options.
-
What’s the difference between the stock MAF housing and the 3.5in larger housing on the cold air intakes. My goal is to get 600hp one day do I need the lager housing or am I good with the stock one?
The factory MAF is good for right around 450-500whp before running out of resolution (Max Voltage: 5v). The 3.5" MAF is good for roughly 900whp and easily rescaled during the tuning process.
