Best TMIC on the market! Extreme Turbo Systems has designed a direct bolt on top mount intercooler for the 04-07 Subaru STI. This intercooler features a large 19x7x4 core with 31 charge rows! Most competitor intercoolers have between 24-25 charge rows. By having 31 charge rows our intercooler has 62 heat transfers vs our competitors 48 heat transfer place which results in a greater heat transfer area. This core is designed specifically for the 2004-2007 Subaru STI this is not an off the shelf core. Unlike our competitor's intercooler, we require no modifications to the a/c line that run behind the intercooler. The intercooler also uses studs to mount the blow off valve instead of bolts, this means no stripping out the holes when over tightened. This intercooler has been designed for maximum performance.
- 19x7x4 large intercooler core
- Direct bolt on
- Mounting studs for blow off valve. (No stripping the holes)
- Clears the A/C line.
- 31 Charge Rows / 62 Heat Transfer Plates (Competitors: 24 Charge Rows / 48 Heat Transfer Plates)
- Weight: 20lbs
Excellent TMIC setup. This is in our SF Forester Swapped with a JDM EJ205. Fitment was perfect. Worked with GFB BOV bolts as well.
Haven't completely got it installed but the staff at ETS were extremely helpful and communcative. Quality is top notch. Not exactly going in a GD STi but a STi swapped GF Impreza wagon instead. It fits very nicely with no problems and I look forward to seeing the performance once the car is tuned.
I installed this on my 02 wrx in preparation for a bigger turbo soon, fitment was perfect, tight but clears everything without an issue, has performed great without a single issue since installed
Had a great experience with Mike over the phone, got he correct intercooler for my build.
Have this intercooler on a hybrid swap (STi block, WRX heads) mated up to a VF48 and it’s so nice. It also looks great in the engine bay. The tuner said I definitely made a good choice going with ETS. Thanks a ton!!
Great unit overall goes in easy like they say. Only problem I had was the stock breather pipe that runs across won’t line up with the bolt holes do to the internal blow off valve mounted to high.
Thanks for bringing this to our attention, it must be an oversight on our part to not include the replacement lines to re-route those hard lines using our supplied soft lines.
We will get you a set sent out ASAP so that you can clean the installation up, thank you for the support!
-Ryan @ ETS
QUESTIONS & ANSWERSAsk a Question
Is a tune required for this intercooler since it does have higher cooling capabilities then the stock
A tune is not required to run the intercooler, but you will not be able to take full advantage of the additional cooling capabilities without one. We do recommend tuning the car for optimal performance!
Will this fit 07 wrx limited?
Yes, this will work with the WRX as well as the STI
Can this top mount be fitted with an IAT sensor?
We can add a bung by request, send us an email to email@example.com and we can generate a custom invoice.
do you ship to New Zealand?
Yes, we ship worldwide!
What does it take to install a STI Intercooler on a WRX?
To install our Top Mount Intercooler on a WRX you will need to follow the steps listed below. This intercooler is not plug and play for the WRX like it is for the STI.
How's does the Sti splitter line up with this TMIC? Is the grimmspeed splitter fit comparable to the OEM?
We designed our intercooler to be a direct repalcement to the factory intercooler. This means any shroud that works with the factory intercooler should work with our top mount intercooler.
Hi does the stencil come printed on the intercooler if you choose the stencil option or does it come separate and we put it on ourselves?
The logo comes painted on the intercooler if you choose the stencil option.
Hello does this utilize the stock STI Y pipe?
Yes it does
Hi, would it be possible to get an IAT bung pre-installed? Kind regards, Manfred
Place it in your order notes and we will see what we can do.
Is the red anodizing the same colour as the red intake manifold in an sti?
It is a bit darker and has more shine to it than the red powder coating.
Will this fit a 2005 wrx?
It requires STI Y-Pipe and Mounting brackets but yes it can be made to fit.
What is this intercooler rated for?
They are good for about 450whp-500whp, but due to being a top mount they do suffer from heat soak a tad quicker then an FMIC would.