Overall, this exhaust system is great. I am late to the game with exhaust replacement, but this is more like what the car should have sounded like from the factory. Nice burbles, pops, etc. For reference, my Evo is still stock under the hood, so the car now sounds faster than it is. I wouldn't call it "loud," but it is significantly more noticeable. Cold starts still sometimes surprise me weeks later. Regarding any drone on long drives, it's generally quite at 55-70. It can be a bit much at times around 80. If I had to nitpick, the spacing for the hangers was a bit tight, so they really had to be forced on. Also, it would probably be best to get another new gasket when using the adapter plate and stock cat. We were able to refurbish the stock gasket. Fitment is great with nice, equal gaps between the tips and the diffuser.
ETS 08-16 Mitsubishi Evo X V3 Dual Muffler Exhaust System
The ETS Exhaust system is made right here at our facility! The exhaust system features a 3.0" mid pipe that tucks up tightly against the underside of the vehicle giving you more ground clearance then any other exhaust on the market. The mid pipe connects to the muffler section using a 3.0" v-band connection. The v-band connection provides a leak free seal and allows for a quick change race pipe for the drag strip! The muffler section consist of two straight through resonators that route into two 4.5" slash cut stainless steel tips. Each tip is centered perfectly in the bumper opening.
- Full 3.0" Stainless Steel Mandrel bent tube
- 4.5" Brushed Slash Cut Stainless Tips
- 3.0" Diameter
- 2x - 3.0" Straight Through Resonators
- V-band Clamp
- Perfectly Centered Tips
- Stock Mounting Location
- Includes All Hardware
- 100% Stainless Steel Construction
*Note: If using a stock catalytic converter select the adapter flange in the drop downs below.
QUESTIONS & ANSWERSAsk a Question
Does this exhaust comes with lifetime warranty?
Yes, every ETS product is backed with a lifetime warranty against manufacturer defects to the original owner.
Will this fit a Ralliart 10 sports back
Unfortunately our exhaust system is not compatible because the Ralliart uses a different rear section than the Evo X.
Does this exhaust fit an MR if it doesn't fit a Ralliart?
This does fit the MR and GSR models.
Hi, Would there be any issue fitting the V3 Quiet to a right hand drive Evo X?
There should be no problem running our exhaust on a RHD model. The downpipe is the only exhaust piece that doesn't fit.
Would i need a tune if I install this?
You're in luck! The ETS Evo X V3 Catback Exhaust System does not require a tune.
What is the difference between the V2 and the V3 (Not the EXTREME version)?
V2 had different tips and Mild Steel flanges. We now use the larger tips and SS flanges. Fitment is the same.
Will these ever come out with a titanium option?
We don't have any plans to at this time. We just offer the titanium single exit.
Does this exhaust system work a Ralliart?
No, the Ralliart exhaust is different from the Evo X and this will not fit unfortauntely.